brake lines F10 / N10

Moderator: Ant-dat

brake lines F10 / N10

Postby barry » Sun Mar 07, 2010 7:19 pm

Hello

question about the brake lines of an F10 and an N10

are the ( almost ) the same??

because i want to change to stainless brake lines and goodridge has them for an N10. XNI-15084-B4

http://www.goodridge.nl/gcat/bikecar/code/codenl3.htm

thanks.

regards barry
Image
barry
Rank: Laurel
 
Posts: 109
Joined: Thu Jan 01, 2009 11:54 pm
Location: Netherlands

Re: brake lines F10 / N10

Postby datman » Sun Mar 07, 2010 8:37 pm

According to my notes, same hoses on F10 and N10.
Fronts are 300mm and are female both ends
Rears 238mm , female both ends.
User avatar
datman
Site Admin
 
Posts: 5655
Joined: Wed Jan 04, 2006 12:19 am
Location: Sussex / Surrey [Will]

Re: brake lines F10 / N10

Postby cedricfan » Sun Mar 07, 2010 9:04 pm

And this is about rubber/flexible hoses, not metal tubes?
TRW has DIY-hoses: choose the length and screw on adapter-connectors.
Image
User avatar
cedricfan
Rank: Skyline
 
Posts: 461
Joined: Wed Jan 04, 2006 7:06 pm
Location: Finland

Re: brake lines F10 / N10

Postby barry » Sun Mar 07, 2010 10:10 pm

datman wrote:According to my notes, same hoses on F10 and N10.
Fronts are 300mm and are female both ends
Rears 238mm , female both ends.




thanks, then i can order them.

will, do you know if N12 Diesel front brakes will fit the F10 , so caliper and disks.
because these are ventilated
Image
barry
Rank: Laurel
 
Posts: 109
Joined: Thu Jan 01, 2009 11:54 pm
Location: Netherlands

Re: brake lines F10 / N10

Postby datman » Sun Mar 07, 2010 10:32 pm

extremely unlikely (never got N12 diesel here anyway)
User avatar
datman
Site Admin
 
Posts: 5655
Joined: Wed Jan 04, 2006 12:19 am
Location: Sussex / Surrey [Will]

Re: brake lines F10 / N10

Postby Wombat Racing » Mon Mar 08, 2010 3:19 am

Will does that also mean that the E10 are the same as F10 and N10
Image
Wombat Racing
Rank: Laurel
 
Posts: 172
Joined: Mon Jan 16, 2006 11:22 pm
Location: Tasmania Australia

Re: brake lines F10 / N10

Postby datman » Mon Mar 08, 2010 10:50 am

no
E10 had single piston calipers (apart from the front drum brake models) and two front hoses per side.
User avatar
datman
Site Admin
 
Posts: 5655
Joined: Wed Jan 04, 2006 12:19 am
Location: Sussex / Surrey [Will]


Return to Suspension , brakes and steering

Who is online

Users browsing this forum: No registered users and 1 guest